Tuesday, August 29, 2017

Black Monday 28.08.2017

Black Monday 28.08.2017

On the wings of mercy. Mercy is cool, chill sexy and all around nice looking. If you look away for her unnatural posture on the in-game models. Where her butt is pused outwards along with her chest. Causing some odd and painful spine bending. None the less I intend to make her outfit work on a lovely little lady friend of mine...somehow. I all likely hood I’ll have to shrink the wings to make them less shoulder pain inducing and less of an annoying door stopper. It is very likely that you’ll never be able to sit on anything besides an ottoman non the less. Naturally the wings also needs to be removable.


All things have to start somewhere. As you can see here I started to cut into a chest plate, from this odd white plastic figurine. Which incidentally is also a very nice thing to attach to the wall and cover in concrete. I’m sure new tenants and unknowing guest will like the addition to the wall and totally not call the police. Then again, people are weird enough as it is. Yes, I am not entirely sure I can be considered normal no more, not that I have ever been in the first place. Since I grew up with a serious lack of self esteem and spent a lot of time avoiding female company. Mostly because I tried to avoid giving people picking on me fuel and most girls only have love, marriage and kids on their mind. Unlike me who is way too fond of games. When and where I grew up,. No one girls cared for games, costumes. Quite frankly I have no idea what they did for fun, but it was not through electronic devices. But hey, that’s just me rambling

So let’s crack on then shall we? I came to the conclusion that the top piece is a solid chest plate, going over the breasts, which then is tied into some sort of white cloth or such that is clearly flexible. That is held in place by strops, much like a corset. With the wings working as a backpack, which is connected to the chest plate, where the strops to distribute the weight are hidden under the surface and over the black cloth.


My first attempt at the wings will be in cardboard, since its cheap and I have a metric ton of it laying about, after ordering a new kitchen bench from Ikea.
twitch.tv/zaceron
https://www.facebook.com/SandCos/
  

Tuesday, August 15, 2017

Many Plans


Lately I’ve been streaming a lot and the goal at the moment is to become Twitch affiliated and make streaming much more like a full time job. At the moment I switch between several games and new releases, cosplay related projects and a lot of drawing. There is a surprisingly big amount of people who want my artistic services. Which I’m happy about and if anyone throw a good idea my way, I might just do it. Adult or otherwise. That being said, I will stream a lot of safe for work stuff. Such as my quite lovely and growing collection of Poros, those cute fuzzballs from the game League of Legends. It is a ball of fur, with two round black eyes and a huge red tongue. The perfect recipe for a mascot and a fluffy plushie. A fellow streamer sometime around Christmas last year put up a challenge, draw me Sailormoon Poros. Everyone said it was too hard! Let me tell you this, it’s the most easy thing in the world to do. Because I’m a professional. Behold the very cute Neptune juggling a jar full of sweet loot. 

I also felt like it was time to make myself some emoticons. Therefor I decided to make a quite fantastic poro animation, that still require some work. Stay tuned for that. It is a work in progress.

For the cosplay section I have a freind that is also a quite beautiful girl, whom love Overwatch. Which wants to dress up as Mercy, naturally I will help with this edavor. There are several challanges involved. Such as the backback with the wings. The overly long staff and her pea shooter. Yet that’s the easy part. Her chest plate that covers her breasts is clearly flexible, yet it is not fabric. Now that is the hard part and her halo like headgear.

Some time in October I will participate in an event called Regncon in Bergen, where I plan to hold a cosplay workshop. I’m not entierly sure about what I will have the participants make. Since I have to provide the materials myself. I suppose the whole «cult» theme is something to capitalize on and the fact that the convention is built around tabletop gaming. I can and I will in all likelyhood teach the folk whom attend, how to make larp sacrifice daggers. Since those are cheap to produce and require almost no resources.

Eventually I will also complete my game design document so I can start making my vision come to life. 

Write a book that takes place in the game universe and do a very valid effort at updating my comics. I'm lagging behind on those. Trust me they are harder to make than you'd think. 

In other words, stay awesome and stay tuned for more.


Zaceron

twitch.tv/zaceron

https://www.facebook.com/SandCos/

Monday, July 31, 2017

Nords in the Fjord Road Trip

Norway is a big and magnificent country. Long and hilly is more like it really. Though that does not take away from the natural beauty of the land itself. Despite the miserable west-coast weather. Which for the most part is composed of rain, hail and slush. For the lack of a better word. The reason I have not been updating this blog was due to me going on a fabulous road trip into eastern Norway. A decidedly much more flat and fertile farmland, with the biggest lake in the land. If one make good speed the trip is only about six hours long, but that is a very hard thing for a tourist to pull off and hardly recommended. The scenic route is totally worth it, especially the road that goes through the Hardanger fjord. A place surrounded by steep mountains and dramatic peaks, with a breath taking view that goes on for miles. At some point I plan to paint a picture of the scenery, like many famous artist in times past. There is a reason why it is a very sought after place for cruise ships to stop by. Which they do by the way. Some argue that this is a bad thing, then again people are very good at complaining. A tourist trap is a tourist trap for a good reason. The road itself crawls along the mountain side, next to the mountain. After crossing an expensive toll bridge built to alleviate the ferry traffic. Later we drove across several fertile farms. Which is the reason Hardanger is also well known for apples, plums and other fresh produce.  
One of the most fantastic stops on the way was a farmers market, selling foodstuff straight from the field, some tasty candy and other products that makes for a perfect gift. Especially the cherries sold there was very delicious. Eventually the road starts to curl up the hillside like a snake. Where a massive waterfall resides. Once you reach the mountain crossing, sparse vegetation and patches of snow dominate the landscape. Which is soon followed by many cottages and a quite nice bathing place. A bit on the cold side but, when the sun is burning hot and the journey drags on it’s a welcome relief. That is only first half of the journey.

Zaceron

#NordsInTheFjord #RoadTrip


Friday, July 14, 2017

My Fate Is Twisted with Worbla

My Fate is Twisted!

Worbla is a very interesting thermoplastic material, which has become very popular and with good reason. However it does come at a price point not everyone can afford. Also as far as internal structure goes, it’s very hard to make it stand on its own, not to mention molding it. Yet it works wonder with a foundation underneath. Most people usually stick with craft foam, since Kamui cosplay made a brilliant tutorial about it and gained a lot of fame at the same time. I will use it in several planned projects and then some more. For now you’ll just have to make do with my first attempt at using the material some years ago. Worbla is very fascinating as it will easily stick to itself, melts with heat and becomes solid but flexible when cool. I did consider some point at tracking down the factory and buy a container load of the stuff.

Introducing the hat of the one and only Twisted Fate from League of Legends, a card hustler, magician and over all fancy pants. Due to the nature of 3d models and video game design, it is a hat that is virtually impossible to make with felt or leather. It’s black on top and red underneath. With an almost Robin Hood like style to it. He is a handsome rogue after all.

I did manage to make the hat work with worbla without any support under. This came at a cost, when it comes to the not so neat and clean top part, where the hat is wobbly. Inside the dome, I glued red felt, for conformist and due to sweat. Worbla is plastic and the texture repels water and is quite unpleasant on the skin. At a later point I added a chin strap, since the darn thing blew off my head during bad weather. The hat is pretty much a sheet of plastic easily carried by any gust.

https://www.twitch.tv/zaceron

Zaceron

Wednesday, June 28, 2017

DIY Uka Uka

Hoga-boga! Anyone remember the spiritual mask that followed the oddly shaped bandicoot, that vanished when damage was taken? I certainly do, and someone gave me the idea, after saying one of my masks reminded him of Uka Uka. Such ideas I consider too good to pass up on. Apparently he was a spiritual shaman of sorts, then he died. Which turned him into a floating mask. A mask that gives advice and invulnerability when three are collected, without taking damage. Uka Uka can be translated into spiritual guidance, which is what he does. For all intensive purposes it's a piece of wood, with a wacky face on it, adorned by several colorful feathers. However I'm not a woodchuck, nor a wood worker. Instead I opted for foam instead. Which I tailored to mostly fit my face. Cut out holes for the eyes and the nose. Then trace lines downwards with a soldering iron, melting groves into the foam. Which gives it a very much wooden look, further enhanced by a decent paint job. Where several gradients of brown was used, the nose is just a red triangle. All in all a very quick build. that I also used on a larp. Basically playing a wonky voodoo priest, with to noisy bells in his belt.
Zaceron

Tuesday, June 6, 2017

Wonder Woman Shield

Wonder Woman’s Shield

Due to the recent and decent wonder woman film, recently released. I decided to make her shield. It was surprisingly easy and took around five hours in total. This is the definition of a DIY (do it your self). Despite how good it looks, I did mess up the runes at the bottom. They’re a bit crooked and nonsensical.

All it took was a wookpan , a sheet of EVA foam, soldering iron and a heatgun. That being said, it is a bit on the small side. However that is just a minor complication. Basically i traced a circle around the biggest pot lid I found. After struggling for quite some time, I did manage to cut a decent circle, Far from perfect. I’m not sure why I removed the pot lid and tried to do it freehand. Some of the liens got a bit wobbly. The hardest part was still to find the mid point of the circle. In the end I just used a ruler to draw up a square around the circle. Then traced a line from corner to corner, this also gave me a decent guide. Now the sane thing is to draw all the lines and do all of the scribbling on the surface before curving it.

The pattern I drew on plastic sheets I put on top of my pc screen, after hoisting the screen onto my lap. We truly live in fantastic times. The old crt monitors made this virtually impossible to do. Basically i found out I can use the flat screen as a make shift light table.

All of the decorations where carved out with a soldering iron, which incidentally releases some dank fumes. A breathing mask is recommended I suppose. After carving out several wonky trenches and gibberish Greek inspired runes, I heated the circle up. Then stuffed it into the wookpan and squeezed it into shape. Heated it some more and pull it out after it got cold. On the backside I attached another smaller circle of foam to attach the shield straps and to make it more sturdy. The straps it self are glued and bolted onto the foam, just to be on the safe side. Some paranoia is always recommended, plus durability is a must. Incidentally this also hides the straps on the backside. Making the whole product much more tidy.

Meanwhile the symbol and the colors was a deliberate pick. The original one from the comics always looked like a plastic toy. Hardly fitting a Greek amazon warrior. The new one looks a lot more fitting, but it lacked the logo. Which game me the idea combining the two designs. On the edges I carved in several crocked and wobbly runes as well, which in all likely hood is garbage and gibberish. But when you consider that people in the ancient world did not have powertools, some imperfections is to be expected. This is also the first time I’ve made a round buckler like this.

There are two plans for this shield, one is to have someone dress u and use it at launch day and then to give it to a lovely little lady, whom is a huge fan of Wonder Woman.

Zaceron


#wonderwoman #shield #diy #foam #protection #superhero

Saturday, May 27, 2017

The man behind the mask

At long last I have come up with a stage act, an act worthy of a cosplay competition. Not to mention the fact hat I have made reapers mask as well. It is probably one of the fastest cosplay props I’ve made. The prop is made from EVA foam as usual and the result is quite stunning indeed. I have a very interesting and a bit silly way to approach this. By simply pressing a paper against the face, while marking out the eyes, the nose and the mouth with a marker pen. It can also be done with the help of a fried or family member with measuring tape, though that is hardly considered good fun. Ones the placement has been found, I proceed to use a transparent overhead sheet to draw out the pattern. It’s very easy to find reference material online, or just use the Overwatch in game gallery. Ones the lines are in place, it is simply a matter of cutting out the various parts. A scissor will usually do the trick. Take the template onto foam and trace it. Cut out the main skull piece, then the beak like nose, followed by the ridge on top. Naturally it is important to refer to the pesky reference picture as much as possible. The mind is terrible at remembering details and I have at several points done silly mistakes, because I got too overconfident. Glue the pieces in place after removing the studded backside with a knife, sand paper or a rotary tool. Which is also my favorite. It’s important to let the adhesive to properly dry and carve out the space for the nose under the beak. While this is well and all, the two pieces on the side has to be cut out as well, but those should be attached after the main portion has been bended with heat. It’s also recommended to cut out a small triangle on top of the skull, to make it curved a the top. When the piece got properly assembled I attached and adjustable strap, allowing me to wear it and other people as well. For the color I mostly went with white mixed with a dash of brown at different density, which I smudged with a sponge, to achieve a more smooth transition. Any slot aside from the eyes I also attached black fabric to make the contrast more striking.






One of these days I will build a Gundam for no apparent reason.
Sighing out

twitch.tv/zaceron


Zaceron